Monthly Archives: February 2019

Marble Master’s Marble Cleaning Tips With Stone Soap Special

Years ago non-polished Marble was used to cover floors because of it’s low cost It was quite long lasting and maintenance was in no way an issue. You just required to sweep and mope up the floor to preserve it. The times have changed and so have changed the marbles being utilised. Now you’ve got pricey marbles glazing like glass. A marble floor polished well looks stunning however it also a truth that it needs proper maintenance. If there are minor difficulties together with your marble flooring you’ll be able to yourself fix it, otherwise you’ll will need the aid of an expert like MarbleMaster UK.

If you’ll find cracks within the marble, repair it having a suitable filler material. Despite the fact that, if the cracks are extremely significant or the cracks are pretty little hair line cracks, you can not fill it. So, the only option that remains is replacement. If your marble receives a sharp impact, it may possibly result inside the appearance of a stun mark. Generally, it is caused by ladies high heeled shoes. The stun marks can be eliminated by grinding with diamond abrasives. If the stun marks are pretty deep and grinding is unable to eliminate it, replacement might be the only answer. Deep scratches may also be repaired by resurfacing it with grit diamond abrasives.

If some acidic things like citrus juice, vinegar, soft drinks or things like that fall on to the surface, it might result in the creation of a dull region on the marble floor which is referred to as “etching”. If the etching is minor, it may be repaired by polishing the region with a crystallizer or polishing powder. Resurfacing the area with diamond abrasives could be utilised to repair heavy etching.

Sometimes, a piece of marble breaks away, leaving a chip or hole within the marble. This is known as “Spalling.” It might be repaired by filling it with a polyester, epoxy or cement based filler material colored to match the stone. Resurfacing the location to the stone level must also be carried out. It is possible to also replace the affected stone however it would surely be a costly affair.

‘Poulticing’ is often a process which is utilised to remove stains. Poultice powders are out there in the market. Initial an suitable poultice is ready and then it’s applied on the stain. As it dries, it takes out the mark from the marble. In case you locate that poulticing does not yield favorable results, you are able to use the approach of “honing.” Honing is the procedure of grinding the surface to a fresh layer of stone and then repolishing it.

One more common problem with white marbles is the yellowing of it. It truly occurs because of the iron present in it that oxidizes with time, turning it into yellow. Given that, this yellowing is due to the marble itself, so replacement is the only option. From time to time, yellowing is also caused by dust or wax coatings that get ground in. You’ll have to strip off the coating to get rid of the yellowishness.

Now, for daily preservation. It is very easy although. Mop the floor daily with Marble Masters Unique Stone Soap Marble Master Stone Soap Special. The marble floor generally loses its shine and polish because of dust, dirt, sand along with other fine particles scratching the surface due to foot visitors. What mopping does is that it removes the dust and dirt from the floor and consequently it keeps scratching to a minimum. It truly is also not advisable to over- wet the floor. A light damp mopping does the best. It truly is also vital to ascertain that the cleaner being utilized is neutral (pH equaling seven). Alkaline or acidic cleaners can adversely have an effect on the luster of your marble.

Polishing ought to be carried out on a typical basis. It can be a known reality that if you try to restore a marble that has turned dull, it’ll take 3 or four times longer to restore it. You are going to have to form a polishing program. Polish the floor and see how long it takes to begin turning dull. That would give you an notion of the interval of time following which you ought to polish your floor.

Use of impregnators and sealers can save your marble from being stained. Removing stains may be an pricey affair and could possibly often be not doable. Use of a superb top quality impregnator or sealer protects the marble from being stained effortlessly. Truly, an impregnator is often a chemical that penetrates the stone. Its property would be to repel water, dye, dirt as well as other substances that cause stains. So, it does not in fact coat the surface. Marble Master deliver a No cost 15 tear anti-stain warranty with their Sealants

So, when you wish to have gleaming, sparkling marble flooring, you should be willing to put some effort in maintaining the marble flooring. Though, the effort would surely be worth it.

Rephouse Rubber Floor Covering For Lismore Aquatic Centre

The latest project using Rephouse’s recycled rubber flooring is the Lismore City Council Goonellabah Sports and Aquatic Centre.

The latest project using Rephouse’s recycled rubber flooring is the Lismore City Council Goonellabah Sports and Aquatic Centre. Designed by Sydney architect Facility Design Group and brought to life by Spantec Builders, this $15 million sporting and leisure facility features over 2000 square metres of Decoflex Universal and 1500m of Neoflex 600 Series.

Decoflex Universal is a very cushioned indoor polyurethane sport floor that is designed to meet the most demanding sports conditions. One of the very unique characteristics of this rubber floor collection is that the thickness of the surface can be modified to suit different design and usage requirements. This is due to a resilient black rubber base mat that can be supplied in different thicknesses.

The rubber base mat is 100% recycled, intensifying the ecological profile of Rephouse’s rubber floors products. This sound absorbing flooring material is ideal for the discerning sportsman.
“Having supplied our rubber floors to various prestigious projects such as the 2004 Olympics, the Pro-Badmington Centre in Malaysia and the Hong Kong Football Club only to name a few, we have certainly developed a reputation as a specialist provider of sports surfacing materials” says Newton, the Managing Director of Rephouse.

One of the major design trends in the sports industry is ecological consideration and the use of sustainable flooring materials has become a big element of the equation when choosing the right floor covering.
“The design of sports facilities is showing more character and the flooring that is used plays a key role. Whether a new sports facility is being designed and built or an existing one renovated, one must never undervalue the impact that flooring can have” says Tony Newton.

The natural rubber flooring solutions from Rephouse are recognised for their quality and ability to provide flooring solutions to various high-scale commercial projects. All of the rubber flooring products mirror the company’s dedication to quality, performance, practicality and sustainability.

“One of the problems is that sports and aquatic facilities, facilities that are built to improve our health and welfare have done quite the opposite. This is because many floors of sports facilities have been covered with flooring materials that is hazardous. Volatile compounds such as Poly Vinyl Chloride (PVC) are a key issue. All of our rubber floors are PVC free making them very safe to use for commercial and sports facilities.” Says Newton.
“There is a lot of competition for sports facilities. The centres that take chances with their floor designs can attract new members. Not only that, many designers agree that of all the design considerations that are involved in developing a new sports centre, the flooring is the one element you cannot afford to compromise on and get wrong” Newton continues.

Established in 1985, Rephouse has become the leading manufacturer of quality durable rubber flooring solutions that are idea for the architectural, recreational and sports industries. Rephouse is the world-leader in decorative rubber flooring solutions with their Decoflex, Neoflex, Playflex and Evopave.

Comparing Hardwood Floors Pros And Cons Of Engineered Vs. Solid Hardwood Floors

Engineered hardwood is the new kid on the hardwood flooring block, so to speak. Both traditional and engineered hardwood floors bring benefits and downsides, as explained below. Read on to figure out whether engineered or traditional solid hardwood floors are best for you.

Conventional Hardwood Floors

Solid hardwood floors may be refinished over and over again, since they are usually milled to a ” thickness. Traditional hardwood flooring is cut this way so that the hardwood flooring can later be sanded and re-sealed. Thanks in part to this process, hardwood floors remain beautiful and durable for decades – it’s not unusual for them to last fifty years or longer.

However, there’s also a significant disadvantage of conventional hardwood flooring: It is affected by water and temperature. Naturally, wood expands in hot/moist settings and contracts in cold/dry conditions. This requires contractors to leave small gaps around the edges of hardwood flooring, so that it can expand in the summer. (These gaps are usually hidden with baseboards.)

In addition to potentially unsightly gaps, hardwood flooring can also pose a health threat if not properly cared for. Water can linger in hardwood floors and cause mold, fungi, and mildew to grow. Not only do these water-lovers destroy wood; they can also cause respiratory diseases including asthma and allergies.

Given the problems that traditional hardwood floors have with water, it’s not surprising that they can’t be installed “below grade,” in a basement. Likewise, most contractors will not install hardwood flooring in bathrooms or kitchens, some of the most moisture-rich areas in a home. Lastly, hardwood floors can’t be built directly on concrete, since concrete conducts water. If you have a concrete foundation/pad, you must build plywood subflooring for your hardwood floors to sit on. Consumers are often put off by these installation limitations.

Engineered Hardwood Flooring

Like plywood, engineered hardwood floors are made of several layers of thin wood bound together with pressure, heat, and glue. Each layer faces a different direction to increase strength. This construction process allows engineered hardwood to be installed nearly anywhere – including bathrooms, kitchens, and over concrete pads – since engineered hardwood does not expand and contract with temperature as traditional hardwood floors do. One last tantalizing possibility for where structurally stable engineered hardwood flooring can be installed: over a radiant heating system.

A downside of engineered hardwood flooring is that it can’t be refinished repeatedly, as solid hardwood floors can. Deep scratches and dents are harder to fix in an engineered wood floor, since engineered wood can’t be sanded down and resealed more than once or twice. This also limits the durability of engineered wood floors to around twenty-five years. A final drawback: many engineered wood floors have raised edges, where interlocking planks come together. Some homeowners find that these beveled edges create cleaning challenges.

Given these disadvantages, engineered hardwood floors can be less attractive for potential homebuyers, who may prefer solid hardwood floors because they can be endlessly refinished. Still, because the average person can’t distinguish between engineered and traditional hardwood flooring, the resale value for engineered wood floors is often comparable to that of conventional wood flooring.

Extremely eco-conscious consumers typically prefer solid hardwood floors, since the manufacturing process for engineered hardwood flooring requires the use of noxious chemicals.

As in most aspects of life, there are upsides and downsides to both engineered and solid hardwood floors.

How To Keep Your Bathroom Plumbing Working Properly

Owning your own home should be one of those things that makes you ready to take on the world because it’s such a huge accomplishment. Unfortunately, you usually end up being nervous about everything, especially your bathroom plumbing.

Some of you might wonder what’s so problematic about the plumbing in the bathroom compared to the rest of the house. Well, it really has to do with the usual “life functions” that take place in the bathroom. The last thing the plumbing in that room needs to have is a problem because the last thing we want in our home is the stuff inside the plumbing.

The problem that a lot of homeowners have is that they are not very experienced when it comes to working on the plumbing in their home, regardless of the room. When it comes to the bathroom, we have fairly rudimentary knowledge of how to use a plunger, but in the back of our minds, we really don’t want to have to deal with that prospective mess. Still, you’re a homeowner now, which means you really have to be on top of things. Your home depends on your elbow grease to keep doing its thing, so enough of sticking your head in the ground – it’s time to get to work.

Here are a few very basic tips on keeping your bathroom plumbing working properly:

Always Be On The Lookout for Drips & Leaks – Listen to your toilet after you flush and watch your faucet after you’ve washed your hands. Do you hear or see drips? If so, you’re seeing two things: 1) a symptom of something that has to be fixed; and 2) money down the drain. You would be shocked to know how much water is wasted due to small leaks.

Try To Prevent Clogs and Blockages – Most clogs and blockages in your bathroom drains are caused by greasy build-up, hair, and other yucky stuff. Try your best to lessen the amount of these things by using traps.

Check Fixtures for Cracks and Leaks – So, you’re an amateur plumber, but that does not mean you can’t see something that isn’t quite right. Take a flashlight and look your bathroom fixtures for any developing cracks and leaks. The compromise of the actual fixture can interrupt the basic function of your plumbing.

Be As Proactive As Possible – If there is one place to be a little over the top in terms of trying to get ahead of things, it’s your bathroom. Find out if you have hard water. Check for limescale. If you are in an older home, think about upgrading the vanity plumbing. Give your bathroom every chance it can have to run well.

Your bathroom plumbing doesn’t have to be a menace to your peace of mind. Even with little to no knowledge of plumbing, you can actually do a lot to keep your bathroom plumbing operating the way it should. In the event that a problem may still occur, be proactive and seek out a local plumber with a stellar reputation & great service. Having a professional on your side is always a good bet.

Engineered Hardwood A Better Hardwood Flooring Choice

When engineered wood first came out on the market, there were speculations that this material was not made of real wood. Experts stress that this is simply not true. Engineered wood floors should not be confused with laminate, vinyl and veneer floors, which imitate or replicate the image or the texture of wood using plastic or a composite of other materials.

Engineered wood is made of three or more layers of hard plywood or high density fiberboard (HDF) and a bonded quarter-inch top layer of hardwood or lamella. This HDF core and lamella composition makes engineered wood eco-friendly, as the core can be made up of recycled wood and the lamella does not require as much timber as a solid hardwood plank does.

And, since they both have exposed surfaces made of hardwood, engineered wood floors can look as attractive as solid hardwood floors. Engineered wood floors can also come in as many hardwood species and colors as solid wood floors.

For the experts in hardwood flooring Los Angeles is home to, engineered wood offers a lot of advantages over solid hardwood. Engineered wood even holds up better in extreme weather conditions, which Los Angeles is no stranger to. The engineered wood’s core resists heat and moisture better than solid hardwood can. And HDF layers can actually counter compression brought about by foot traffic and other external factors. This allows for more durability and stability.

Moreover, the installation of an engineered hardwood floor Los Angeles flooring companies are proud of is quick and easy. Engineered floors can easily be installed on any kind of original floor surface, without the need to fasten planks to the floor or to each other. And since engineered floors come in a wider range of sizes, they are sure to cover floors perfectly, without the usual gaps of solid hardwood flooring.

Engineered wood floors are becoming the hardwood floor Los Angeles favorite because of all these benefits and the fact that the wood itself and the installation costs significantly cheaper. The planks are eco-friendly and very affordable, at almost half the average price of solid hardwood planks. Engineered wood flooring installation is significantly easier and quicker than solid hardwood flooring installation could ever be.

Stonewood Outlet Brings Extensive Tile Flooring Program To New 82nd Street Location In South East Portland

Stonewood Outlet, a Portland, Oregon based hard surface and decking outlet store, recently opened its second location just off of Cascade Highway and SE Otty Road in Happy Valley, Portland, Oregon. Stonewood is one of Portland’s largest hard surface and decking outlet stores, featuring factory direct priced products sold directly to the public. The store carries a diverse product line, from hardwood flooring to stone, tile, laminate, counter tops, and decking.

Stonewood Outlet’s tile flooring program is one of its biggest sellers. The store has recently acquired a large amount of premium tile at a discounted rate. As a result, they will be selling their tile to the public at a highly discounted rate, while supplies last.

Tile flooring is a popular flooring cover and surface material for a variety of reasons, not the least of which is its popular beauty. It is valued for its lustrous and polished appearance, which lends room a clean look as well as an expansive feel due to its light reflectivity. Additionally, a tile floor is incredibly durable, known to last the lifetime of most homes in which it’s installed. Popular materials for tile floors include ceramic, porcelain, marble, and granite, to name just a few. Many homeowners install tile surfaces as an affordable way to add value as well as beauty to their home.

As far as a market for tile flooring, Portland Oregon is a great location. A properly installed tile floor is very resistant to moisture and helps to reflect and make the most out of sunlight, which comes as a great benefit for any homeowner in the beautiful though often overcast Rose City.

Stonewood Outlet features two locations to serve the public of Portland, Oregon: Their northwest Portland store at 3424 NW Yeon Avenue and their Happy Valley location at 9907 SE 82nd Avenue.

How To Keep Your Lino Floor Clean

When it comes to buying lino flooring, you will find there is an array of products to choose from.

Should you be keen to get items from some of the leading names in the industry, such as Rhino lino flooring, there are plenty of reputable brands offering a range of styles and designs for you to select.

You will also find cheap lino flooring is available, meaning that even if you’re shopping on a budget you can get something that looks good as well as being highly-durable, even if it has not cost you an arm and a leg.

Lino flooring is highly-versatile – you may want to install it in your kitchen or living room or even both. But no matter what product you choose, you will be sure to want to keep it looking good.

Cleaning lino flooring is a relatively easy task. So you should find that no matter what is spilt on it, a little time and effort is all that is needed for your floor to get its lustre back and for it to look as good as new once more.

Should you choose to fit lino in your kitchen and dining room, you may well find it is bombarded with food that has been dropped by some of the more messy people living in your home. If this is the case, you should be able to get rid of such debris using a brush or vacuum cleaner, meaning your floor will be clean again in a matter of minutes.

However, should liquid – such as coffee and red wine – be spilt on your floor, be sure to use a mop.

This should be well-wrung out before it is put on the floor in order to avoid causing any further damage. Doing so should ensure that your lino stays clean and shiny.

It is best to mop up spills as soon as possible to prevent your floor from staining, however in the event of this happening marks can usually be removed with a fine nylon pad.

You may also want to consider using a non-acidic, mild detergent when mopping up spills.

In addition you can ensure that your lino floor stays clean by waxing it. However, be sure to read the manufacturer’s instructions before starting this.

By following such tips you can keep your lino flooring clean and looking as good as new for many years to come.

Wood Flooring – Looks, Functionality and Longevity

Present on the market for centuries, wood flooring have succeeded in maintaining their popularity in peoples choice due to the charm, elegance and warmth that cannot be rendered or even matched by any other flooring option. The sanding and refinishing options available for these products mean that a wood flooring, irrespective of its age, can be kept in good condition by still offering performance and good looks. The newer products available on todays market bring even more than older versions, as advanced technologies produce more durable finishes and recreate the details of true craftsmanship for more appealing designs.

There are many different species of wood used in the manufacturing of wood flooring, and whilst traditional choices such as oak, maple, cherry and walnut still remain the number one choice, other exotic wood essences, such as bamboo, teak and mahogany are also beginning to be considered a good option for residential improvements. In terms of appearance, wood flooring offer a wide palette of finishes, textures and designs to choose from, ranging from natural and lacquered to brushed and oiled tones, designed to complement available furniture and the overall decoration scheme.

There are several types of wood flooring available nowadays, which all come with different advantages and why not, disadvantages. The most classic type of wood flooring is the solid wood flooring, cut from single pieces of wood and milled in strip, block and plank formats. Whilst strip floors feature slim boards, plank floors offer narrow planks and the ones in block format come in small strips or other geometrical designs which once interconnected form various distinctive looking patterns, such as herringbone. In terms of installation, solid wood flooring must be nailed and glued down to the sub floor, resulting in a highly stable floor covering designed to offer life lasting performance.

Engineered floors, the other type of wood flooring available today, are manufactured from small strips of wood pressed together in a crisscross pattern and covered in a layer of real wood timber, to emulate in detail the look and feel of solid wood floors. This revolutionary manufacturing process makes engineered floors one of the strongest flooring options available, as unlike real wood floors, engineered ones can be safely integrated inside rooms with fluctuating temperatures and increased moisture conditions as the planks will not bend, shrink or lose shape. Another advantage brought by engineered floors lies in their floating floor character, meaning that engineered planks can be installed onto the sub floor without the use of glue, nails or other adhesives. In fact, the setup of engineered floors is very similar to the one employed by click laminate floors.

Offering a proper care is the key of the longevity of wood flooring. Although unlike other floor treatments, wood flooring can be sanded and refinished when desired, just following the manufacturers guidelines and instructions for cleaning will ensure that the floor will maintain its appearance and finish for the years to come.

Consult Interior Designer For Flooring

When youve bought a new home or are having one made, you are going to have to decide what type of flooring you want in it. You will choose from wood, ceramic tile or hardwood and you will also choose the color and style. If you know the colors you want your house painted in and the style you want it decorated in, it will be best to match your flooring accordingly. But, if you arent sure yet, choose neutral flooring that will accommodate any style and color.

Choosing your flooring is a big decision because it can make or break your house. If youre afraid of making this decision on your own, hire a professional. An interior designer will gladly help you decide what is right for you and your home by finding out your individual likes and dislikes.

You can find an interior designer for your flooring needs in just about any city world wide. If you dont know of one on your own, then ask for a recommendation from someone you know or look for one in the phone book. You will be able to tell if the interior designer has the same vision that you do or not.

Once youve decided on the flooring, you can keep the interior designer around or you can do the rest on your own. You will know right away if you still need the help of a professional or not by how hard it is for you. Those without an eye for design should consult an interior designer if they want their house to look beautifully decorated. Some people do have a natural talent for decorating and wont need any help at all. It all depends on your personality and what youre good at. So, if you know what type of flooring, drapes, colors and furniture go best together, you should save yourself the money and do it all on your own!

How To Make Your Home Look Happy With Good Flooring

Flooring is an important aspect of your home and good flooring is a real asset to a home and a bad one reduces the effect of all good ones to a great extent. So when you are doing the home renovation you must pay special attention to your flooring to have a good and glowing flooring that enhances the look and feel of your home in many ways. Select a good and apt flooring material to be used in your home and you may even choose different flooring materials for different rooms and create unique moods in each of them. The flooring material choices are so many and it needs a lot of attention to find the right one for your home. You can have all natural flooring like hardwood and softwood flooring or go for artificial ones like the laminated and vinyl floorings. The color and look of the flooring can make your room to give a bigger or smaller look and it is necessary to use the right type of flooring for the areas like your living area and front rooms so that they are able to give the required good impression about your home in the minds of your visitors. The floors can reflect a lot of light and make the rooms looks bigger and fresh. When the floorings are not made rightly it will make the room look small cramped, damp or even distressing. So make the right choice for your home flooring and it can add to the personality of your home.

Melissa Roy owns several blogs on House numbers and cabinet Hardware, read at Brass House numbers and Iron House Numbers .